Volunteers Being Sought for Home Internet Study

CED Newsletter

The California Public Utilities Commission (CPUC), Geographical Information Center (GIC) at California State University, Chico and CSU, Monterey Bay are seeking 500 volunteers to take part in the CPUC Home Internet Study. The study aims to explore and analyze the Californian’s internet connections including:
* Performance of connections in rural areas, compared with connections in urban areas.
* Performance of DSL connections, compared with Cable connections.
* WiFi Router technologies in use in the California WiFi landscape.
* Performance of Ethernet (wired) connections vs. WiFi connections.

For additional information about the project, or to sign up, visit www.calspeed.net

I was a volunteer member of the beta test team for the CalSpeed data collection box. The box arrived in the mall, and I connected it to my internet router with a Gigahertz connection from Wave Broadband.

When Initially installed, before the beta test started,  the Wave 1Gig modem interface device’s speed ranged from 700 to 850 Mbps using my desktop Mac with Speedtest.com Speed checks were take at random times during the day. Good to go for the beta test.

IMG_1248
Photo of beta test box

 

During the beta test, we were on vacation for two weeks in Seattle. While we were gone, PG&E change our electric meter. They cut off the power to the house while making the change. For some reason, the router quit working as did my drip irrigation system. I rebooted the router upon returning home and data collection restarted. After the reboot, I did a speed test on the Mac using SpeedTest.com and Wave’s Speed Test ranged between 300 Mbps and 500 Mbps.  Not the Wave promised 1000 Mbps!

These speeds are consistent with the overall averages collected by the CalSpeed data collection box. As you can see from the recorded data, my average was about 400 Mbps on ethernet and about 160 Mbps on WiFi.

Screenshot 2019-02-01 12.49.28
Screenshot of collected data from the beta test box on the CalSpeed webpage

The Wave network modem had built-in WiFi signals, one in the 2.4 GHz band and one in the 5.3 GHz band. It was not clear to me which band the CalSpeed box was monitoring, and I failed to ask.

I returned the beta test box to the development team, but I continue to monitor the Wave broadband signal with my DIY recorder box. Following the beta test, I downgraded my Wave connection to 250 Mbps Service, as my DIY box is limited to about 300 Mbps due to the circuit limitation on the Raspberry Pi processor board.

Raspberry Pi BB Recorder

Given all the marketing hype about broadband internet access speeds, the only valid method of determining the real speeds is field testing. Going out to the specific location and measuring the speed of the bits coming out of the ethernet port. So far, I am not getting what I am paying for, and there is a high probability that most users are not experiencing their ISPs advertised level of service.

Here is an example output:

Wave Tri Display

One thought on “Volunteers Being Sought for Home Internet Study

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s